BG table, ST-122-Z2L1-07 Rev B. Board tops sit A below the soffit, studs stop A below the channel, no fixings into the head channel.
PDF gives an A3 sheet of this view with a title block. AutoCAD gives a .zip holding the .dxf, with every component as a named block.
Wall list
The walls this project needs. Pick them, choose a sheet and send them: linings go first, then single frame, then twin frame. Switch project from the top bar.
Walls
Sheets
Title block and wall tables
Set up the title block and the small table under each wall for . Changes apply to every sheet in the project. Choose which sheets each block appears on.
Title block
Back to sheetBlocks are drawn top to bottom. “Share” blocks split the free height between them; the others keep a fixed height.
Preview
Table under each wall
Long names shrink to fit, then wrap onto two lines. More than four fields sit in two columns.
Sheet
Choose a paper size, then add as many wall details as you like, each at a true scale. Drag them to arrange, and download the sheet as a PDF to print.
Parts
Every visibility state of the dynamic blocks, with nested blocks resolved, at 1:1 in millimetres. The red cross is the insertion point used when assembling.
Boards and skirting
Choose how each board type and each skirting is drawn: fill colour, hatch and hatch colour. Your choices are used on every drawing, the sheet legend and the PDFs, and belong to the project picked in the top bar, so each project can have its own.
Boards and materials
Skirting types
Tick “Skirting” next to a base or vertical section on the Sheet to draw it. The default type is used unless you pick another in “Selected detail”.
BG CAD hatch register
From the visibility states of BG's “Gypsum Boards Rev06” block. Pick “BG CAD (by board)” above to use these thickness-specific patterns.